What is the British standard for scaffolding?
BS 1139 is a British standard of scaffolding materials, certified and trusted in most of Europe, widely used in civil and building structure.
What standard code is scaffolding?
The minimum dimensions in case of ballies shall conform to IS : 3337-1978*. In case of single pole scaffolds, ballies of Class 111 can be used whereas for double pole scaffold, balks of Class I or Class II shall only be used.
What is the name of the code of practice that relates to scaffolding?
Safe Work Method Statement (SWMS) Make sure: scaffolders provide an adequate Safe Work Method Statement (SWMS) before starting any high-risk construction work, which should be kept on-site until the scaffold is dismantled. any work undertaken at the worksite is to be done in accordance with the SWMS provided.
What is a Class 1 scaffold?
and imposed loads such as wind. The imposed load applied to the scaffolding depends on its use. Four classes of loading are available: Service Class 1 – 0.75 kN/m2 – Inspection and very light duty access. Service Class 2 – 1.50 kN/m2 – Light duty such as painting and cleaning.
Is 4014 a scaffolding?
8 Page 13 IS : 4014 ( Part II ) – 1961 facilitate the movement of barrows where boards or planks which form part of a working platform, gangway or run overlap each other or are not of reasonably uniform thickness where they meet each other or owing to warping or for some other reason do not provide an even surface.
At what height is scaffolding required Australia?
four metre
Scaffolding work is defined with a four metre threshold for licensing purposes. This means in some cases a high risk work licence may not be required to erect a scaffold—because it is less than four metres—but there may still be need for a SWMS because it is more than two metres.
Are toeboards required on scaffolding?
Scaffolding. Most scaffolding more than 10 feet off the ground should have toeboards at least four inches high on all open sides of the scaffolding, according to OSHA guidelines. Ship scaffolding, however, can have three-quarter inch by one-and-a-half inch edges rather than standard four-inch toeboards.
Who is the Code of practice for working scaffolds?
Robert Roe Assistant Chief Executive Officer and Secretary to the Board 2 Health and Safety Authority f Code of Practice for Access and Working Scaffolds 1. Introduction 1.1. Background The Code of Practice for Access and Working Scaffolds was first published in 1999.
What are the different types of system scaffolding?
Each type of system scaffolding consists of a range of components such as standards, ledgers, transoms and base plates and has its own specific erection requirements. 5 Health and Safety Authority f Code of Practice for Access and Working Scaffolds Tube and fitting scaffolding is constructed from steel tubing and several types of couplers.
What is the safety code for scaffolds and ladders in India?
Indian Standard SAFETY CODE FOR SCAFFOLDS AND LADDERS PART I SCAFFOLDS (First Revision) Second Reprint OCTOBER 1996 UDC 69.057.6 : 614.8 : 006.76 0 Copyright 1988 BUREAU OF INDIAN STANDARDS MANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG NEW DELHI 110002 Gr7 March 1988 . IS:36!36(Partl)-1987 Indian Standard
Do you need to do design calculations for a scaffold?
Design calculations are essential for all scaffold designs and, by extension, for ALL scaffolds. This includes bespoke designs, as well as ‘generic’ standard solutions, such as those provided by the NASC TG20:13 e-guide (which are backed up by analysis).