How do I know if my riding mower belt is bad?

These signs show when a mower belt could experience failure and needs replacement as soon as possible:

  1. The belt has s​​​ide wall damage. Mower belt edges should be smooth and even throughout the entire length of the belt.
  2. The belt has a glazed or bu​rned sidewall.
  3. The belt is​​ cracked.

How much does it cost to replace a drive belt on a riding lawn mower?

Drive Belt Idler Pulley Replacement Cost – RepairPal Estimate. Labor costs are estimated between $61 and $77 while parts are priced between $72 and $76. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.

How do you change a belt on a Simplicity lawn mower?

  1. Place the mower on a flat surface.
  2. Pull the idler arm on the right side of the mowing deck toward you to release tension on the deck belt.
  3. Remove the old belt from the center pulley, which is located in the middle of the deck.
  4. Install the new belt in the reverse order in which the old belt was removed.

What does the deck belt do on a lawn mower?

The deck belt on your riding lawn mower connects the crank shaft to the lawn mower blades, causing them to turn.

How much does it cost to fix a idler pulley?

The total price to replace the idler pulley typically ranges between $80 and $200, with the parts ranging between $40 and $90, and the total labor cost averaged between $40 and $110.

How do you change the belt on a Simplicity zero turn mower?

How to Replace a Deck Belt on a Zero-Turn Simplicity

  1. Park the Simplicity mower on a level area.
  2. Lower the mower deck to the lowest position.
  3. Remove the belt cover from the pulley on the far right side (the side with the grass chute) of the deck.
  4. Remove the belt cover from the pulley on the left side of the deck.

Is there a problem with my Simplicity lawn tractor?

I have a 1998 Simplicity Broadmoor 14 hp lawn tractor with about 230 hours on it. As I was running it it would lose power and not make it up even the slightest hill. Not an engine issue.

Where can I find the simplicity transmission problem?

Location: Coon Rapids, Mn. Well, unless you are planning to sell it “as is”, if it doesn’t work you really have nothing to lose by taking it apart and seeing what is wrong and if it is repairable at a reasonable price. If not, you will only be able to second guess yourself as to what might have been wrong and if you could have fixed it.

What kind of transmission does a simplicity tractor use?

Otherwise just move on and don’t sweat it. the first place to start is find out what brand of transmission is in the tractor. Hydro units are made by Eaton, Hydro-Gear and Tecumseh. At one time Simplicity used a Vickers pump.

Why is drive belt not working on simplicity Broadmoore?

If you have not replaced the belt I would start there. Also, check to see if the tensioner moves farther with the belt off. If it does not, you need to find out why. The idler carriage/pulleys are functional and seem to be keeping adequate tension on the drive belt. Not sure what the proper belt play shoud be for a belt of this length.

Share this post