Why is my Brother HL printer not printing?
The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine is lost. This can occur as a result of wrong settings or configuration of the printer driver. There are several basic troubleshooting steps you can take to resolve this issue.
What does Cannot Print 35 mean?
The message “Unable to Print 35” will appear on the display for one of the following reasons: i. A foreign object, such as a paper clip or ripped piece of paper, is stuck in the machine; ii. If there are faxes in memory, you can transfer them to another fax machine so they are not lost.
How do you fix a paper jam on a Brother printer?
Please follow the steps below to solve the problem:
- Open the front cover and leave the machine for at least 10 minutes to cool down.
- Slowly take out the drum unit and toner cartridge assembly.
- Close the front cover.
- Pull the paper tray completely out of the machine.
- Use both hands to slowly pull out the jammed paper.
How do you remove the paper jam on a Brother printer DCP t710w?
Unplug your Brother machine from the AC power outlet (electrical socket). Pull the paper tray (1) completely out of the machine. Pull the two green levers inside the machine to release the jammed paper.
Why the printer is not responding?
If your printer fails to respond to a job: Check that all printer cables are connected properly and be sure that the printer is turned on. Cancel all documents and try printing again. If your printer is attached by USB port, you may try connecting to other USB ports.
How to fix brother mfc-9440cn’unable print 32’Error?
Please try again later. Super easy fix to the Brother MFC-9440CN (and similar) “Unable Print 32” Error, some models use the message “Machine Error 32”. A small piece of tape fixes it! Takes 20 minutes to do. Here is link to the official document from Brother that explains its a piece of paper, but it is not (at least in my case).
What to do if your brother printer says print unable?
1. To reset the machine, power the machine Off using the power switch located on the right side of the machine. Wait approximately 10 seconds and then power it back On. NOTE: The Brother machine can be powered OFF for up to 4 days without losing faxes in memory. – If the date and time appear on the display, then the issue is resolved.
How to clear the message ” print unable 32 ” from the LCD display?
How do I clear the message “Print Unable 32″ from the LCD display? The message ” Print Unable 32 ” or ” Machine Error 32 ” will appear on the LCD display if paper or labels are stuck inside the printer or drum unit. Follow the instruction below to clear this error.
How to clear the message’print unable 2A or’machine?
The message ‘Print Unable 2A’ or ‘Machine Error 2A’ will appear on the display if there is a mechanical malfunction of the Brother machine. 1. To reset the machine, power the machine Off using the power switch located on the right side of the machine. NOTE: The Brother machine can be powered OFF for up to 4 days without losing faxes in memory.