Is cross-band repeat legal?
There is a lot of discussion, but no real consensus that the cross-band repeat function is totally legal according to FCC rules. Most manufacturers have implemented the function in a way that causes unidentified transmissions, Here’s the scenario: When you transmit, you identify your transmission with your callsign.
What is cross band used for?
Crossband (cross-band, cross band) operation is a method of telecommunication in which a radio station receives signals on one frequency and simultaneously transmits on another for the purpose of full duplex communication or signal relay.
What does cross banding mean?
veneer border
: a veneer border (as on furniture) with its grain at right angles to the grain of the adjacent wood.
What is band repeater?
A cross-band repeater (also sometimes called a replexer), is a repeater that retransmits a specific mode on a frequency in one band to a specific mode on a frequency in a different band. This technique allows for a smaller and less complex repeater system.
What is cross band in plywood?
[′krȯs‚band] (materials) In plywood comprising three or more plies, a layer of veneer whose grain direction is at right angles to that of the face plies.
How do I choose a repeater?
How to Choose a Repeater
- Ask Local Hams. The first place to check for repeater recommendations is with local hams that are active on VHF/UHF FM.
- Check a Repeater Directory. The next place to look is in a repeater directory.
- Search The Internet.
- Listen.
- Making a Contact.
Is the Yaesu-ft-8000r dual band mobile transceiver?
FT-8000R Dual-Band FM Mobile Transceiver The FT-8000R is a deluxe. compact FM mobile transceiver providing wide-band receive capability, along with a host of features which provide state-of- the-art performance on the 2-rn and 70-cm amateur bands.
What is the user manual for the Yaesu ft-8000?
Yaesu – FT-8000 user manual FT-8000R Dual-Band FM Mobile Transceiver Table of Contents Specifications . Accessories & Options Front panel Controls, Switches, & Connector Rear Panel Connections .
Is the ft-8800r a TX or rx radio?
The FT-8800R operates as two radios in one, with either 144 MHz or 430 MHz as the “Main” TX/RX band, while simultaneously monitoring the other band. Each band has its own Volume and Squelch controls. And, if you like, you can configure your FT-8800R for VHF-VHF or UHF-UHF operation, too!
How does crossband repeat work on mobile radio?
Your dual-band mobile or base-station VHF radio hears your 70-cm transmission and immediately re-transmits it on 2-meters at 50 watts. Your transmission is crossing over to another band. Do you see how useful this might be? You may want to know how to set up crossband repeat on your mobile radio. It’s not as hard as you might think.