What is Watlow EZ-Zone?
The EZ-ZONE PM panel mount limit controllers from Watlow® offer control options to reduce system complexity and the cost of thermal loop ownership. The EZ-ZONE PM limit controller provides high amperage power controller output and over/under limit control in one space saving, panel mount package.
What is ez-zone?
The EZ-ZONE PM Express panel mount controller is an industry-leading PID controller that allows optimal performance utilizing simple control and menu functionality without complex features. It can be ordered as a PID process controller or as a dedicated over and under-temperature limit controller.
What is a PM controller?
The EZ-ZONE PM Express controller is an industry-leading PID controller that allows optimal performance utilizing simple control and menu functionality without complex features. It is ideal for basic applications and usage levels.
What does a temperature controller do?
A Temperature Controller is a device that is used to control a heater or other equipment by comparing a sensor signal with a set point and performing calculations according to the deviation between those values.
Is PID a good controller for temperature control?
Temperature controllers with PID are more effective at dealing with process disturbances, which can be something as seemingly innocuous as opening an oven door, but the change in temperature can then have an impact on the quality of the final product.
What are the 4 temperature controls?
The four controls of atmospheric temperature are (1) differential heating of land and water; (2) ocean currents; (3) altitude and geographic position; and (4) cloud cover and albedo (Pearson, The Atmosphere).
Is the Watlow ez zone pm panel mount controller compatible?
The EZ-ZONE PM controller is easy to use and is ideal for PID controller, over/under limit controller or integrated controller needs. With Watlow SELECT™, you can search online, configure products for an exact fit and quickly receive your order.
How to seal an EZ zone pm S1 r1-watlow?
5. Place the blade of a screwdriver against each of the four corners of the mounting collar and apply pressure to achieve IP65 seal (see figure 3). Connect your sensor as indicated in the corresponding diagram. Thermocouple Platinum 100Ω or 1000Ω RTD
How many volts does an EZ zone pm use?
For other output types see the User’s Guide Connect the power source corresponding to your part number. 1 or 2: 120 to 240 V(ac) 3 or 4: 24 V(ac or dc) T1 S1 volts
What are the part numbers for the Watlow controller?
EZ-ZONE®PM For Part Numbers: PM6 [C,R,B,J,N,E] _ [E,F,C] [J,C] – _ AAA _ _ _ Follow the steps in this quick start guide to wire and set up your new Watlow controller 1. Make the panel cutout (see figure 1). 2. Remove the green screw terminal connectors from the controller. 3. Insert the case assembly into the panel cutout and slide the