Is Lysaght the same as COLORBOND?
LYSAGHT® Roofing & Walling is manufactured from COLORBOND® and ZINCALUME® steel. LYSAGHT Roof Sheeting and Wall Cladding come in a range of profiles to suit any architectural style.
Is custom ORB the same as COLORBOND?
LYSAGHT CUSTOM ORB® is the famous BlueScope Lysaght corrugated profile, equally at home with traditional and contemporary design. Available in a wide variety of COLORBOND® steel colours. Roof sheet lengths of up to 24m can be used before an expansion joint is required.
What is the minimum pitch for a custom orb roof?
1 in 12
A special anti-capillary forming in the side lap allow you to use CUSTOM ORB on roof pitches as low as 5 degrees (1 in 12). Sheet lengths of up to 24 m can be used before an expansion joint is required.
Can Mini Orb be used for roofing?
LYSAGHT MINI ORB® is a mini-corrugated wall cladding which is suitable for use in interior or exterior applications. Its subtle profile is a perfect complement to other LYSAGHT® roofing and walling claddings, to provide a contrasting surface as an accent feature.
How far can custom orb span?
A special anti-capillary forming in the side lap allow you to use cuSTOM Orb (or cuSTOM blue Orb used on curved surfaces) for roof pitches as low as 5 degrees (1 in 12). Sheet lengths of up to 24m can be used before an expansion joint is required for roof applications.
What Colour is Surfmist?
Surfmist® Surfmist® embodies qualities of freshness, purity timelessness and independency. Snow, the mist from the sea and surf, pure white sand, and the billowing sails of yachts all remind us of this colour.
What is the minimum pitch required for a metal roof?
The minimum slope for lapped, non-soldered seam metal roofs without applied lap sealant shall be three units vertical in 12 units horizontal (25-percent slope). The minimum slope for lapped, non-soldered seam metal roofs with applied lap sealant shall be one-half unit vertical in 12 units horizontal (4-percent slope).
Is there a minimum roof pitch?
The smallest pitch of a roof is 1/4:12, which translates to 1/4 inch rise to 12 inches of run. Such a small pitch can only work with built-up roofing or specialized synthetic roofing.
How wide are mini orb sheets?
Mini Orb covers a width of 820mm and has a depth of 6mm making it a perfect choice even in smaller rooms where space is tight and bolder profiles might be overwhelming.
What is a mini orb?
LYSAGHT MINI ORB® is a mini-corrugated profile which is suitable for use in interior or exterior applications on straight or curved surfaces. Its subtle profile is a perfect complement to other LYSAGHT® claddings to provide a “contrasting” surface as an accent feature.
How big is a Lysaght custom orb roof cover?
The original Australian corrugated roof sheeting and wall cladding ideal for modern and traditional architecture in residential and commercial applications. A lightweight yet strong roofing and walling material Versatile – Can be laid flat or sprung curved Nominal cover width: 762mm
What kind of roofing is used for Lysaght?
Roofing can supply roof flashings for all the Lysaght range including: A wide range of 23 different colours means that Lysaght have the roof capping to top off your roof perfectly. And Lysaght uses 100% Australian made Colorbond or unpainted Zincalume steel. Stramit is another major Australian producer of high quality roofing materials.
Which is roofing company makes ridge cappings and flashings?
Lysaght manufacture ridge cappings and flashings to match all their products including Roll Top Ridge Capping, Barge Capping and Barge Roll. They can also manufacture a range of custom shapes and profiles. No1. Roofing can supply roof flashings for all the Lysaght range including:
Who is the owner of Lysaght roofing and Walling?
LYSAGHT, its agents, officers, employees, sub-contractors or consultants make no representations, either expressed or implied, as to the suitability of the information and data in this Manual for your particular purposes.