How do you do a pre-trip inspection on a truck?

How To Do A Proper Pre-Trip Inspection

  1. Ensure all compartment, cab, and sleeper doors open and close securely.
  2. Check all cargo is properly secured with undamaged, unworn load covering and securement devices.
  3. Inspect coupling devices for loose or missing fasteners.

How much can you miss on CDL pre-trip?

The pre-trip inspection presents 15 defects, five of which are worth 12 points and 10 of which are worth four points. The highest score possible is 100 points. The skills test challenges drivers with six obstacles, or “problems,” each of which are worth up to 50 points.

What do you do on a pre-trip inspection?

When performing a pre-trip inspection, one must do the following:

  • Check for problems under the hood.
  • Ensure the truck is not leaning.
  • Make sure the cabin is safe.
  • Check that the brakes are working properly.
  • Look for flaws in the coupling system.
  • Look for defects in the trailer.

What items should a post trip inspection include?

The inspection report must cover the following* parts and accessories, at a minimum, although the written report itself does not have to list these items:

  • Service brakes including trailer brake connections.
  • Parking (hand) brake.
  • Steering mechanism.
  • Lighting devices and reflectors.
  • Tires.
  • Horn.
  • Windshield wipers.

How many things can you miss on CDL pre-trip?

How long should a pre-trip be?

Currently, there are no guidelines as to how long a pre-trip inspection should take. If you check everything you should be checking, a full inspection should take you approximately 30 to 50 minutes.

What is the first step of the seven step pre-trip inspection?

Push dimmer switch and check that high beams work. Turn off headlights and four-way, hazard warning flashers. Turn on parking, clearance, side-marker, and identification lights. Turn on right turn signal, and start walk- around inspection.

What is the difference between pre-trip and post-trip?

A good pre-trip inspection keeps the driver from leaving your facility with a vehicle that has an existing problem. A good post-trip inspection gives the shop time to react to a problem that has been identified and to correct it before the truck goes back out on the road.

What do you need to know about CDL pre trip inspections?

FREE, courtesy of CDL College. Class B CDL Pre-Trip Inspection. Straight Truck. The purpose of this inspection is to make sure the vehicle is safe to operate, and to see if you have the. Class A CDL Pre-Trip Inspection. Tractor Trailer. 1. ®. LIGHTS & REFLECTORS o Proper Color o Working o Not Broken o Not cracked. LEAKS o Check for.

How long should a dot pre trip inspection take?

How Long Should a DOT Pre-trip Inspection Take? There’s no standard or required amount of time a pre-trip inspection should take, but on average, a thorough DOT pre-trip inspection takes around 30 to 50 minutes.

Can a driver use a memory aid during a pre trip inspection?

In many states, a driver may use the Memory Aid found in the Commercial Driver’s License Manual during the Vehicle Inspection test segment. This is the only memory aid allowed and it cannot be altered or include notes or additions. Class B Pre-Trip Inspection Point to, or touch, every item that you are inspecting.

Who is the author of the CDL inspection manual?

Title CDL Pre-Trip Inspection manual Author Michael Fox! Subject CDL Skills Test Pre-Trip Inspection stud Keywords Pre-Trip Inspection Study Guide, Free Pr Created Date 1/26/2016 10:19:54 PM

Share this post