Should I grease sway bar links?

You do need to use grease. While the bar doesn’t move much, any interference with that movement will be detrimental to the proper movement of the suspension.

What type of grease do I use for sway bar links?

MOOG engineers suggest using a premium heavy-duty lithium or synthetic grease.

How often should you grease sway bar links?

1. Ideally every oil change. You should have an idea after a few times if you can do it every other oil change. But once or twice a year should be fine for most.

Do duralast sway bar links come pre greased?

They come with grease.

Are MOOG sway bar links pre greased?

Moog Problem Solver: K80066 The OE designs of the front sway bar end link in the 2000-2010 Focus’ are not serviceable-meaning they cannot be greased. Since they are not serviceable they are prone to premature wear due to intrusion.

Should you grease thermoplastic sway bar bushings?

It’s important that you keep your sway bar bushings lubricated. They need lubrication if you notice a squeaking sound when you drive over bumps or make aggressive turns.

Are Moog stabilizer links pre greased?

Moog Problem Solver: K80066 The OE designs of the front sway bar end link in the 2000-2010 Focus’ are not serviceable-meaning they cannot be greased. Since they are not serviceable they are prone to premature wear due to intrusion. The metal ball stud corrodes quickly and abrades the bearing surface.

What does a bad sway bar bushing sound like?

When a vehicle’s bushing goes faulty, the stabilizer bar becomes unstable, and this will cause your car to make sounds while driving; these sounds are best described as squeaking, rattling, or clunking. The noise gets louder as the driving progresses, especially when going on a rough road.

What does the front sway bar link do?

Sway bar links are what connect the outer end of the sway bar to the suspension component. Because the sway bar itself is a torsional swing, the sway bar link smooths the motion transfer between the sway bar and the control arm. The sway bar link maintains the camber angle of the inner wheels to control motion.

Who makes Duralast front end parts?

Most of their suspension parts are made by Moog and TRW by the way. I try to price check them as well as NAPA to get the best part at the best price. I just recently bought a 92 IROC steering sector from Autozone for $116, the same that Classic sells for over $300!!!!

What are the symptoms of a bad sway bar?

Symptoms of Sway Bar Problems. Some of the common symptoms of a bad sway bar bushing or sway bar links going bad are: clunking noise, rattling noise, knocking uneven noise road, lack of stability when driving and noise going over speed bumps. poor handling during turns.

How much does it cost to replace a sway bar?

Sway Bar Replacement Cost. Typical cost to change the front sway bar bushings and links range between $450 and $900 depending on make and model. The good news is that the parts themselves are very cheap, especially if you buy them online. The typical cost of front sway bar links and bushings is under $100.

What is a sway bar and what does it do?

A sway bar is usually a torsion spring that resists body roll motions. It is usually constructed out of a cylindrical steel bar, formed into a “U” shape, that connects to the body at two points, and at the left and right sides of the suspension.

What is sway bar linkage?

The sway bar linkage connects the sway bar to the control arm and helps keep a vehicle balanced and stable when it turns and corners. The sway bar linkage usually consists of a straight rod with bushings around the sway bar and control arm, or a Z-shaped bar with studs or bushings on both ends.

Share this post