How much is a TTR 230 worth?
Share this
| *Private Price Guide | $3,550 – $4,200 |
|---|---|
| *Trade In Price Guide | $2,350 – $2,800 |
| *Price When New | Price Unavailable * |
How much horsepower does a TTR 230 have?
Yamaha TTR230
| Manufacturer | Yamaha Motor Company |
|---|---|
| Engine | 223 cc (13.6 cu in) 2-valve, SOHC, air-cooled, four-stroke, single |
| Bore / stroke | 70 mm × 58 mm (2.8 in × 2.3 in) |
| Compression ratio | 9.50:1 |
| Power | 17 hp |
What age is a TTR 230 for?
The Yamaha TT-R125 will suit riders from about age 10. That would be the TT-R125E with a 17-inch front wheel and 14-inch rear, and a drum front brake.
How tall should you be to ride a Yamaha TTR 230?
The ergonomics favor riders in the mid five-foot range, though someone six-foot tall can sit on the bike comfortably on the trail. Shorter riders will have to stretch to touch down on technical trails, which isn’t a good feeling for beginners.
Are Yamaha ttr230 any good?
Yamaha TT-R230 Review | Bike Reviews. This bike still has a place in the market and it is widely acknowledged for its reliability and durability. It’s a great bike to punt around the farm, great for beginners and fine for intermediate riders.
Can a carburettor be rebuilt on a ttr250?
This step-by-step guide takes you through a complete rebuild of the TTR250’s Teikei Y30P carburettor. The same carb is used on all TTR250 models and the only differences are in the jets and nozzles which vary between years and the countries in which the TTR was sold. There is advice on taking out the carb here.
How to remove vent hose from Yamaha TTR230?
Repeat the process with the second cable. It’s easier to tape the cable out of way when it’s free. Take the front hose clamp off the carb. Then remove the rear hose clamp from the carb. Removing the carb can be a real hassle, but is a lot easier when the rubber boot to the filter is removed first. You can now remove the vent hoses.
How to remove throttle cable from Yamaha TTR230?
Both throttle cables have to be detached. Back off the lock nut first. Then the cable can be lifted free. The top cable is now free. Repeat the process with the second cable. It’s easier to tape the cable out of way when it’s free. Take the front hose clamp off the carb. Then remove the rear hose clamp from the carb.
How to fix a Yamaha TTR230 breathing mod?
Bottom the adjuster out, the back off one full turn. Before we proceed, this brass plug must be drilled out. We used a fresh one-quarter inch drill bit and drilled very gently with light pressure. Blow the hole free of chips. This controls the fuel flow. Using a straight slot screwdriver, bottom the adjuster out, then back off one full turn.